Carriage Bolts, Grade A, Zinc Plated The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order. If . Basic Bolt Diameter Square Depth P Corner Radius on … - Length of a carriage bolt is measured from the underhead bearing surface to the extreme end of the bolt. - ASME B18.5-1990 does not specify … Page 1 of 2 Fastenal Product Standard REV-13 Date: June 26, 2017 CB.SS Carriage Bolts, Stainless Steel The information below lists the required dimensional, chemical and physical characteristics of the products in this purchase order.

Portland Bolt manufactures carriage bolts from 1/2″ diameter through 1-1/4″ diameter in most ASTM, AASHTO, and SAE specifications. Special tooling can be created to produce nonstandard head dimensions, carriage bolts larger than 1″ in diameter, or bolt heads herepany’s name and/or logo. The carriage bolt features a smooth rounded head The carriage bolt features a smooth rounded head for appearance safety and security. The square shank under the head pulls into the material as nuts are tightened; this prevents the bolt from turning. Round head carriage bolts are also referred to as round head square neck carriage bolts. The dimensions listed above refer only to the standard neck bolts. If the dimensions for your requirement are similar but do not correspond directly with those above, you may need a round head short neck bolt.

the information presented is believed to be accurate at the time of document creation. however, barnhill bolt co, inc. is not responsible for any claim traceable to any errors [typographical or otherwise] as contained herein. barnhill bolt co, inc. makes no warranties as to the accuracy of this information. carriage bolt, inch series, grade 5 The carriage bolts are available in abundant varieties. Norwood Screw Machine Parts provides high quality carriage bolts in various specifications for diverse applications. Norwood’s Custom Carriage Bolt Specifications. Carriage bolts are pushed into a hole with the same diameter as the shank. Ramesh Steel Corporation manufactures carriage bolts from 1/2 diameter through 1-1/4 diameter in most ASTM, and SAE specifications. Standard Thread Length. Bolt lengths ≤ 6: Thread length = (2 X diameter) + 1/4 Bolt lengths 6: Thread length = (2 X diameter) + 1/2 Note: Most stock carriage bolts have extended thread length. Stock

The square neck on this carriage bolt cuts into wood to prevent turning while the nut is tightened. View More Technical Specs . Item Carriage Bolt; System of Measurement Inch; Carriage Bolt Type Carriage Bolt; Neck Type Square; …